1/ When the new database is created without demo data, the admin has a
'silhouette' as a default picture. When a new user is created without
picture given by the current user, the new user will have a 'silhouette'
as a default profile picture.
2/ web: image for fa-user-slash. This image will be used when a record is
unassigned.
3/ web, *: Change placeholder by default when record is unassigned.
We want to have a fa-user-slash icon when a record is unassigned instead
of 'placeholder.png'. A method is created in the BaseModel to have a
generic method to change easily the placeholder for other models.
4/ Adapt kanban test to keep the same behaviour. Attention the behaviour is
a bit different. Because, now the default image is given by the server to
change easily the default image when a record doesn't have an image.
Thus, we don't say if it's the default placeholder, but we can say it's
not the same image of the record (in this test, the record, it's the
partner).
5/ misc: display 'Unassigned' in the hover on kanban cards if record is unassigned
closesodoo/odoo#41356
Taskid: 2060206
Related: odoo/enterprise#7758
Signed-off-by: Yannick Tivisse (yti) <yti@odoo.com>
Co-authored-by: jdoutreloux <jud@odoo.com>
Co-authored-by: Yannick Tivisse <yti@odoo.com>
Without demo data, for the odoo-master transifex project
closesodoo/odoo#41935
X-original-commit: dab7670b73506fb3a835695ee3bd735e0c5e5c2b
Related: odoo/enterprise#7287
Signed-off-by: Martin Trigaux (mat) <mat@odoo.com>
Followup of a425695e
The terms were back in 12.0
Courtesy of Juan José Scarafía
closesodoo/odoo#41624
X-original-commit: 85d0c7001a997748d7691205bbb8d066597591a5
Signed-off-by: Martin Trigaux (mat) <mat@odoo.com>
followup of rev [0]
If these wizards are called on multiple pickings, display the list of
the pickings that could be impacted and allow to select which one should
be impacted.
We also adapt the sanity checks at the start of `button_validte` in
order to specify the concerned pickings if needed. We do not enable the
multi behavior for batch at the moment, so it's only enabled for the
validate multi in the list view.
[0] 6ab4b0d496
task-2069646
closesodoo/odoo#41497
X-original-commit: ff276c6484b138982f185ec9c832f2dbf25baaef
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
Set a default company since it is mandatory and hidden in mono-company
mode.
opw-2129187
closesodoo/odoo#41259
X-original-commit: ffb6360e87ed8b6fbe5ae19a801230d1f89bc660
Signed-off-by: Nicolas Martinelli (nim) <nim@odoo.com>
`action_done`on pickings should be a private method,
and called only trough the picking validation process.
task-1938108
closesodoo/odoo#39174
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
*: account
crm
event
fleet
hr_expense
hr_holidays
hr_recruitment
mail
maintenance
mrp
note
project
purchase_requisition
repair
stock_landed_costs
stock_picking_batch
survey
website_event_track
This commit is making sure that the exception activities filters are
only defined where it make sense (i.e. where the system can actually
create an exception activity).
We have therefore removed 'exception activities' filters where the
system won't be creating any.
Task-2056425
closes odoo/odoo#36027
Closes: #36027
Signed-off-by: Alexandre Kühn (aku) <aku@odoo.com>
Makes batch picking list view multi-editable. Also, sets `name` and
`state` fields as readonly in the model as they must not be editable in
the list view and they were already readonly in form view.
Task #2078163
There are too many image sizes. Since they are stored resized this takes time to
generate when saving a new image, it's more rows on the attachment table, more
files on the disk, ...
64px is close enough to 128px that it can be removed without a big impact on
download size.
It will even reduce download and number of requests when both images are
displayed because now only one has to be downloaded and then benefit from cache.
The difference between the two is typically around 1.5kB which is negligible
these days, especially when the request overhead is around 0.5kB already, not
even taking into account other factors such as latency.
If a 64px image must absolutely be returned, it is still possible to pass the
size parameters to the image route. But the current guideline is to handle
resizing in the views when necessary.
Views
=====
- remove width and height attributes when existing CSS rules are overriding them
(eg. `.oe_kanban_avatar` in the right context)
- add CSS rules instead of width and height attributes when possible
- use `object-fit: cover;` where width and height are forced to avoid distortion
of non-square images
- for products, use `object-fit: contain;` instead, keep ratio but without crop
- add new CSS rules where the expected size was max 64px*64px before due to the
image size itself
- remove `img-fluid` where using size classes to avoid conflicting rules
task-2060865
closesodoo/odoo#36147
Signed-off-by: Sébastien Theys (seb) <seb@odoo.com>
From the Inventory (stock) application go to Operations>"Batch Pickings"
Create or open an existing Batch Picking and click on "Print".
A report will be generated containing the barcode associated with the
operations. The barcode cannot be read from a barcode scanner because
it's too blurry (probably because of the low quality it contains
an unnatural greyscale).
When this report is generated from the template, a request to generate
the barcode is sent to the controller, which invoke the procedure to
create the png image on the fly with a set of parameters embedded into
the request.
If the width and height parameters are too low the result is a low
quality image, so the solution is to pass higher parameters and then
resize the image via "style" attributes.
Note that the same solution is applied in multiple templates.
opw-2045949
closesodoo/odoo#35752
Signed-off-by: Nicolas Martinelli (nim) <nim@odoo.com>
The new visual indicator for exception activities has been added on all
corresponding kanban and list views.
A new filter "Exception Activities" has also been added in the
corresponding search views.
Task 1889379
closesodoo/odoo#31839
Signed-off-by: Xavier Dollé (xdo) <xdo@odoo.com>
All activity filters are now invisible in the corresponding search views.
These filters were only used by activity redirection (when clicking on
the activity item in the systray) so we hide them to reduce the noise
for the user.
"My Activity" filter has also been removed, its corresponding domain is
now directly set in the action where it was used.
Task 2036392
This attribute is misleading as it is insufficient to correctly upgrade
the database. It only renames the column in the database, but other
operations are needed, like updating the corresponding `ir.model.fields`
record (and its xmlid). The default values and the translations are also
lost during the upgrade.
Moreover, this feature was misused. It was:
- left on fields during multiple versions.
- used on reports (SQL views). This would be ok if the feature was
complete, but, as is, it was useless.
- kept unchanged after a second renaming of the field (which can happen
versions later the first rename).
- used, even when the meaning of the field changed. i.e. the field
`archived` has been renamed to the classic `active`, but the value
in the database should be switched.
image_original => image_1920 (now resized to 1920)
image_big => image_1024
image_large => image_256
image_medium => image_128
image_small => image_64
image replaced by image_1920 (when writing) or by image_1024 (when displaying
what was previously the big size)
+ add new intermediate format:
image_512
PR: #34925
This class referenced demo data but even if they weren't installed, the
tests were passing. Remove the definition and usages.
closesodoo/odoo#35343
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
Improve batch picking demo data.
The first page shows the summary of all the pickings. next page onwards we can see the picking information in the report.
task-1889404
Closes#29209
* = stock_account, stock_picking_batch, stock_product_expiry, delivery
Purpose of the commit is to set the new attribute OPTIONAL = SHOW/Hide on tree
view so the user can easily hide/show the optional fields on the tree view.
Update string date field from incoming products tree view.
Update string virtual_available field from product tree view.
task-1997453
Closes#33888
Multi is the default api for methods, it is not necessary to explicitly
decorate methods with it, adds clutter and most people use it because
they see that the rest of the code uses it.
Done with `find . -type f -name '*.py' | xargs sed -i '/@api.multi/d'`
