In some case, when the user enter by mistake an account move line
with an amount of 0,the reverse operation does not works properly.
The issue happenned during the reverse operation because it tries to
reconcile a 0 account move line with no matches (credit or debit).
See opw-1931961
When dropping a snippet into a page, it is dropped in the drop-zone
which is the nearest of the user cursor. When moving a snippet, that
condition did not apply and the user was required to put the cursor at
the exact location of the drop-zone.
Also, for both drag and drop features, the drop zones which appeared
were not displayed correctly for full width columns, which made dropping
sometimes impossible when multiple col-*-12 were below each other.
task-1937758
closesodoo/odoo#30899
If fleet.vehicle_state_active is not found in the system then the method
will raise an error, hence it won't allow creating any fleet.vehicle
closesodoo/odoo#30925
- Create a product and set a contact as the vendor (for instance, Arthur
Gomez from Asustek in the runbot)
- Set a specific name and code for the supplier
- Create a RFQ for this vendor (Arthur Gomez - the contact person)
- Add the product, confirm the RFQ
On the product, the company (Asustek) is automatically added as vendor,
but there is no vendor name and code.
opw-1929745
closesodoo/odoo#30891
- Activate:
'Track lots or serial numbers'
'Manage several Warehouses, each one composed by several stock locations'
'Advanced routing of products using rules'
- In the main warehouse, activate Pick + Ship
- In Stock Locations, create 'WH/Stock/Shelf 3' and 'WH/Stock/Shelf 4'
(1 and 2 already exist, use the same config)
- Create a new product 'Foo', activate Tracking By Lots
- On Foo, use 4 times the "Update Qty on Hand" (order is important):
Add 1 on Shelf 2, create a lot
Add 1 on Shelf 1, use the same lot
Add 3 on Shelf 4, use the same lot
Add 1 on Shelf 3, use the same lot
- Create a SO, set a partner
- Ensure that YourCompany is used as warehouse
- Add several SO lines (order is important)
a line with 1 product Foo
a second line with 1 product Foo
a third line with 4 products Foo
- Confirm the SO, you now have 2 deliveries, 1 Pick, 1 Out
- Open the Pick, all moves should be available, you should have:
4 operations:
Shelf 2, quantity 1
Shelf 4, quantity 3
Shelf 1, quantity 1
Shelf 3, quantity 1
3 moves:
A, quantity 1
B, quantity 1
C, quantity 4
- On each operation, select the lot created before and set the quantity
to be fully done
- Validate the Pick
The moves end up like this:
- Move A with qty 1: is done and linked with a quant of 1
- Move B with qty 1: is done and linked with no quant
- Move C with qty 4: is done and linked with a quant of 1, a quant of 3,
a quant of 1 (sum is 5)
In the Out picking, the move linked with the source move (B) with no
quant stays in "Waiting another move" even if the source move is done.
This outgoing move will never be available.
In the method `recompute_remaining_qty`, we loop on operations, and
match them wih the moves. However, the operation with the largest
quantity (Shelf 4, quantity 3) is processed before the move with the
highest quantity (C, quantity 4). Therefore, when we later loop on move
C, `qty_assign_cmp` is larger than zero, which sets `need_rereserve` and
ultimately triggers `rereserve_quants` in `do_transfer`.
A first part of the fix is to check for the location of the quants when
matching moves and operations. This fixes the original issue, but
inconsistencies can still arise since a quant which is taken partially.
therefore, we make sure to never take more than the quantity on the
link.
opw-1932624
closesodoo/odoo#30857
- Set a cost of 12.34 for product P
- Create manually a new analytic entry
- Choose product P
- Set desired quantity
The analytic amount is set to 12.00.
This is because `move_id` is empty, therefore `currency_id` is empty as
well and `decimal_places` is zero
opw-1924184
closesodoo/odoo#30869
Before this commit, the customer is allowed to change picking type after the
stock.picking record is moved from draft.
But it doesn't make the changes in the stock moves and operations as the
procurements are already created for initial demand.
To avoid confusing the user, it can now only be modified in draft state.
Authored by SodexisTeam
opw 1848252
opw-1934814
closesodoo/odoo#30865
- Create a product P with:
Costing Method Average Price
Inventory Valuation Perpetual (automated)
- Create a component C with, costing 10.
- Create a BOM for P:
1 Unit of C
- Create a MO for P, validate
=> a journal entry of 10 is created
- Modify the BOM for P:
2 Units of C
- Create a MO for P, validate
=> a journal entry of 15 is created
The journal entry should be 20.
opw-1928342
closesodoo/odoo#30766
Before that, having a payment with amount_residual=0, but amount_residual_currency!=0 did not display it.
Also, 'outstanding credits/debits' label was displayed in case amount_residual was != 0 with an amount_currency=0 (and of course, a currency_id value was set on the aml). This could for example happen in case of partial reconciliation, were the amount_residual field is used to keep track of what will have to be written in the exchange rate difference entry when the reconciliation becomes full.
closesodoo/odoo#30362
This commit simplifies the code and improves the performance
of _compute_sale_order_count.
execution time from O(n^2) to pretty close to O(n)
Project : Performance Issues
Task : Geostaff : Success Pack 5 (100h) (opw-1912303)
With https://github.com/odoo/odoo/commit/ac8b0fcfc5299b5ea62543b8382cb419fed4868e,
the 'country_events' class was renamed to 'oe_country_events'. This was
done correctly for JS animations and snippets but not for the 'Country
Events' option in the customize menu. This made the option useless.
This commit solves the problem by supporting the two classes (as it
is a stable fix).
closesodoo/odoo#30662
In a pos session:
OFFLINE
make an order with invoicing , try to validate
The order stays there because it needs to be validated by the server
make another non invoiced order, validate
ONLINE
make another order
At validation, all orders will be pushed to the server
Before this commit, when trying to validate the invoiced order
the report download couldn't find the order id, and crashed
This was because the order in question was already pushed
but treated as a non invoiced order
After this commit, an "warning" message is displayed to the customer
saying he/she has to print the invoice from the backend.
In most cases it is enough and acceptable, since a customer would actually leave the premises
and come back later for the invoice
It is also safer in terms of data consistency to keep pushing all orders once the connection is back
OPW 1918044
closesodoo/odoo#30485
Before this commit, the web client had a naive strategy to handle lost
connections: it tried to poll the server every 2 seconds until a rpc
succeeds.
This works quite well from the perspective of the user, but may be a problem
from the perspective of the server. If a server is down for a longish period,
then each users active tabs will then perform a request every 2 seconds. This
means that the server will be progressively hammered by many requests, which
will clutter the logs, and make it more difficult to gracefully recover.
With this commit, we simply exponentially increase the delay each time, and add
a little jitter to give a better distribution.
Cherry-pick of 4a3f04bcc5closesodoo/odoo#30136closesodoo/odoo#30596
Have a tax that has a different account for refunds
make an invoice and its refund
Before this commit, the refund's tax is still in the old account
After this commit, the refund's tax is in the account for refund defined on the tax
OPW 1907950
closesodoo/odoo#30325
In case the discount product is misconfigured and therefore not loaded
by the POS, a traceback appears when applying a discount.
Add a comprehensive error message instead.
Closes#30574
opw-817527
closesodoo/odoo#30582
Use read_group is faster than the python equivalent,
and then don't push ids in ORM cache, which makes
the ORM faster later in the process.
Also unlink in batch.
For editing many2one fields (and partially many2many) most widget show
an autocompleting list of targeted records.
They thus have `autocomplete="off"` to prevent browser completion.
But chromium has an history of breaking `autocomplete="off"`, see:
- https://caniuse.com/#search=autocomplete
- https://crbug.com/468153
- https://crbug.com/587466
- https://crbug.com/914451
- https://crbug.com/923895
It seems that since chromium 71, the heuristic to ignore
`autocomplete="off"` has become more aggressive and for example if there
is at least 3 fields like an address in a page, chromium will ignore
`autocomplete="off"` for the fields like an address.
So for example the eidting the many2One field with placeholder "Country"
in a contact page now has a browser autocomplete menu that is:
- hidding the many2one autocomplete
- going to save empty country it appeared visually filled if the
autocomplete result was selected.
With this changeset, the placeholder in the many2one instance is
interspersed with U+FEFF charcters (ZERO WIDTH NO-BREAK SPACE) so the
browser does enable the autocomplete feature by force.
This should thus remove the issue (until it is fixed by chromium) in the
case of field named "Country" or matching other regexes in this file:
https://github.com/chromium/chromium/blob/cdb1b2073f12/components/autofill/core/common/autofill_regex_constants.cc
U+FEFF has been chosen instead of more recommended characters because
other have been shown erroneous for printing in some windows
configuration (see cb2a3afa7).
10.0 version of #30439
opw-1930588
closes#30439closes#30449
Task #1930691
Purpose
=======
If the download security is set to 'Authenticated users', the route should prevent public users
from downloading the slides.
closes#30281closesodoo/odoo#30399
Before this commit, the menu to go into the backend from the website was
not possible to open on iOS without opening the right menu first. This
was because position: fixed is not able to counter overflow: hidden in
iOS. This is the fix for stable versions, the proper solution will be
done in master.
Closes https://github.com/odoo/odoo/issues/29390
task-1923151
closesodoo/odoo#30507
OPW 1918926
Current behavior:
The sql query groups by date,id in a intermediary table instead of the result. This allows to get data in the wrong order if the statements were not produced sequentially. The fill values are computed in the wrong order and may override correct values.
Desired behavior:
There is no override of the values correctly computed.
closesodoo/odoo#29936
Define a field on a model as:
- o2m to res.partner
- the field's column, hence its name, has capital letters in it
(studio does that)
create two objects of that class, each one linked to a different partner with the new o2m
merge the partners
Before this commit, the object linked to the second partner, was deleted
This was because merge partner sql requests did not quote the column name
After this commit, the second object still exists
This commit is tested in v12.0 with PR #30300 only. In v10.0 it is not testable as
the model concerned is in CRM, and that no new fields in business modules can be added in stable
OPW 1925060
closesodoo/odoo#30301
Some views have the primary mode while having an inherit_id view
In such views, if the user wants to change the inherit_id,
the mode must remain primary.
The use case behind this is a user who want to change
the inherit_id view of the view
product.product.form (product.product_normal_form_view)
to another view.
This view is in primary mode while having an inherit_id
(product.product_template_form_view).
In such a case, the primary mode must remain,
otherwise the view will no longer be opened by default
when opening a product.
Indeed, when searching the default form view of a model,
it only searches for primary mode views for this model.
The `all` is there because this is an `api.multi` method.
We could consider adding a `self.ensure_one`,
but it breaks the API if someones calls this method with multiple records.
This is likely to happen, as this method is used
in `write` which is likely to be called with multiple records.
In my opinion, in master, this should be replaced by an
onchange so the user can see the change of mode
when he adds or remove an inherit_id for a view.
opw-1916324
closesodoo/odoo#30241
This is essentially a backport of module l10n_be_intrastat_2019 made for
Enterprise v12 + the refactoring needed on the original v10 module to
allow the changes to apply where needed.
Was requested by opw-1887019
closesodoo/odoo#30400
When posting a URL containing a semicolon, odoo stops the link
before the semicolon instead of continuing the link to the end
although it is a valid characters in URL (see RFC-3986)
e.g. the url "example.com&foo;bar" matches "example.com&foo"
instead of the whole link
opw-1918367
closesodoo/odoo#30198
- Create the following attributes with values:
Size: S, M, L, XL
Color: Black, White
- Create a product template with the following attribute values:
Size: S, M, L, XL
Color: Black
The `name_get` of `product.product` returns `Name (SIZE, Black)` while
it should only return `Name (SIZE)`.
When using `attribute_id.value_ids`, the list of values contains all
possible values of the attribute, not only the values which apply to the
given product. In this case, it contains 'Black' and 'White', therefore
the condition `> 1` is verified and the attribute is kept for display.
We go back to the original filtering, and add `attribute_line_ids` in
the list fields read in order to avoid prefetching.
opw-1922140
opw-1922447
closesodoo/odoo#30273
Cherry pick of 5b769650d6 in version 11.0
A customer can pay an order with a non-cash journal (e.g. a credit
card through a stand-alone terminal).
When this order has to be refunded later it should be possible to do
so on that same journal.
Some code prevented this from happening, notably a check in
order_is_valid which explicitly prevented this for an unknown
reason. There is no explanation in the
commit (4647f896a4) introducing that.
This commit allows the following:
1. input what you want to refund with a negative qty
2. click 'Payment'
3. click the Credit Card (type Bank) journal
4. (amount is auto-populated)
5. click 'Validate'
opw-805302
opw-1913731
closesodoo/odoo#30218
- Create a bank statement with more than 80 lines (therefore more than
80 AML)
- Reconcile the lines
- Go back to the bank statement, and try to add a new line
An error arise:
"You cannot do this modification on a posted journal entry, you can just
change some non legal fields"
The error arise on the `move_line_ids` field on which the web client
tries to write.
Actually, this field is hidden since it is only used in the domain of a
stat button. We can make it read-only.
opw-1921138
closesodoo/odoo#30266
The super call of action_payslip_done executes the method compute_sheet.
Without this compute_sheet call, there is no salary lines and no accounting
move is created.
closesodoo/odoo#29737
Nathan de Pryck