Before the control panel refactoring, whenever a user pressed ENTER in
the search bar (with no text), the current view was reloaded. This
untested behaviour was changed (not on purpose) with that refactoring:
instead of reloading, the search view add a useless filter in the list
of facets.
We restore the previous behaviour in this commit.
closesodoo/odoo#30503
This commit removes the attachment button from the sidebar.
Reason:
following the introduction of the attachment button in the chatter (7f97c9fc05)
and the partial removal of this feature (1dbb555aab) in V12.0,
it has been decided that the chatter button will completely replace this feature.
closesodoo/odoo#29468
Since the control panel refactoring, the `context` key on a `<field>` in the
search view was ignored (like <field name='pricelist' context="{'pricelist': self}".
The previous behaviour has been reintroduced and modified a little bit.
For way too long, an ugly hack was used to get a numerical value in self. This
ugly hack was still present but wasn't working since 8.0 (at least for the
numerical value). A counter hack (see odoo/odoo@4a81e8a) was then applied to
avoid really using a `selection` widget. To get even more confused, `self` was
replaced by the *last* user-specified value.
Well, it's time to clean this mess.
Now, the `self` key is replaced by an array of user-specified values (by value,
we mean the field value i.e. the `id` for a many2one, or the `key` for a
selection field).
Task 1902826
closesodoo/odoo#30368
Open a pivot view with default filters automatically activating
Disable those filters
Change the groupBys on the rows and cols of the pivot
Save your result as a favorite filter
Before this commit, the filter did not contain the context information for columns groupby
Also, the search view did not exploit the context of the new filter as it should be
After this commit, the flow works as expected
OPW 1913732
closesodoo/odoo#29415
Open studio to modify the widget displaying a relational field.
The report_layout widget can be selected, say, to display payment terms.
Obviously it doesn't make sense.
We remove its supported field, as the field is not generic
(indeed there is only one use for it in the codebase).
opw 1919369
closesodoo/odoo#30303
Before this fix, in studio when the user select the field then focus out
then focus in and selected a child field, an exception is triggered because
the last page is visible but the data are removed.
backport of 12.0's 9eef25ae0a
opw-1928453
closes#30277
Original commit breaking kanban view: 4cd379cf6e
Commit reverted: 287136b85e
Two fixes were added independently to fix this bug but only one is needed.
odoo/enterprise@c8fe86fa22 best fix
287136b85e other fix (now reverted)
Reverting this commit fix the following bugs:
- Swipe on kanban : Not able to swipe on empty column. it only works on cards
- Popup activity on kanban card is unusable
- On kanban separation, "Undefined" cards are before the kanban separation
closesodoo/odoo#30177
Before this rev., a crash might occur when the user quickly
switched twice between pages (e.g. go to page 2, then page 3) on a
slow network.
In the given example, when data of page 2 returned, the list was
re-rendered. Unfortunately, the offset of that list' datapoint was
already changed due to the switch to page 3, meaning that the view
tried to render a page that wasn't loaded yet, leading to a crash
if there were modifiers to evaluate, or to empty records being
displayed.
This rev. ensures that the view is rendered with the data of the
page it expects.
closesodoo/odoo#30150
Start on the modal obtained by a "search more". The offset is never reset.
So suppose you are on page 2, looking at record 81-160.
Do a research that gives less than 80 records.
The result of the search is nothing, since is has been done with a 80 offset.
It should be reset to 0 when we do a new search.
opw 1920826
closesodoo/odoo#30109
Before this rev. a traceback occured when trying to export all records in a list
view.
An old reference to `searchView` was still present in the list controller, which
is not used anymore since the control panel refactoring (see odoo/odoo#29106).
Task 1917628
closesodoo/odoo#30073
Since 12.0, some modal footer button order were changed. The primary button
would not be the one in the modal footer corner.
This is against bootstrap but more annoyingly, users are intuitively clicking
on the secondary button, ending up closing the modal and losing form
information they entered.
This commit simply fix the regression from 12.0 as before 12.0 these buttons
were positionned correctly.
Note that a commit in master (saas-12.2) will fix all the other ones that were
wrongly positionned before 12.0.
Step to reproduce:
- Go to an event having the possibility to register.
- Click on 'Register Now', a modal is shown to write details (name, email..)
- You intuitively click on 'Cancel' as it is the bottom right button
|________________________________ CONFIRM _ CANCEL _|
- The modal is closed, if you try to open it again your infos are lost
Closes#29884
task-1922120
As of saas-11.3 there is a "Attach document" widget that is meant to
more easily add attachment.
But on firefox the click event is coming from the button, where on other
browsers it was possibly from a child element.
So the code expecting the child element did not work on firefox.
opw-1920842
closes#29903
Most operations on X2Many widget possibly propagates a field context
(name_create, name_search, ...) but the original read or read on an
onchange does not.
With this changeset, the field context is also used in these instances.
The assertions added in the added test failed with:
expected: ["world"], result: [undefined]
expected: ["world","world"], result: [undefined,undefined]
fixes#29203
opw-1914466
closes#29866
When displaying a video, with the browser window at a certain size, or
resizing it (or opening developer tools) we could the following error:
"ResizeObserver loop limit exceeded"
This can be reproduced in chromium just with this JS code:
window.onerror = function(e){ console.log(e); };
document.body.innerHTML = '<div><video controls src="v.webm"/>';
The issue only happen if:
- the video server does not support HTTP range requests
- the controls are displayed on the video
- browser size is in problematic size/resized to problematic size
And the error is raised in window.onerror but not displayed in the
developer console.
With this change, we ignore these errors until fixed in chromium.
chromium bug tracker: https://crbug.com/809574
opw-1928512
closes#30239
Before this rev., there was a race condition when the user did
some changes on a form view (triggering an onchange), saved and
clicked on the breadcrumbs to leave the form view (before the
onchange returned). As a consequence, the dialog telling the user
that there are pending changes was displayed. This mostly occured
on the main_flow_tour since the removal of an unnecessary check,
and could be reproduced manually on a slow network.
Basically, the check if there were pending changes was done too
early (before the view was actually saved).
This rev. fixes a concurrency issue in the kanban view spotted by
the Project tour and the removal of the delay in the tour system.
Let's assume the following scenario in a kanban view grouped by a
many2one field with at least one column and with the quick create
feature enabled:
- quick create a new column
- before the column is actually created, click on CREATE in the
control panel to create a new record
Before this rev., the record quick create widget was opened
directly, but as soon as the column was created, the view was
re-rendered, and the quick create widget was lost.
This rev. forces the column to be created (and the view to be
re-rendered) before opening the record quick create.
Before this commit, the web client had a naive strategy to handle lost
connections: it tried to poll the server every 2 seconds until a rpc
succeeds.
This works quite well from the perspective of the user, but may be a problem
from the perspective of the server. If a server is down for a longish period,
then each users active tabs will then perform a request every 2 seconds. This
means that the server will be progressively hammered by many requests, which
will clutter the logs, and make it more difficult to gracefully recover.
With this commit, we simply exponentially increase the delay each time, and add
a little jitter to give a better distribution.
closesodoo/odoo#30136
Before this commit, if a user tries to group a kanban view by a date or
a datetime interval, then tries to drag and drop a record from one column to
another, then the web client crashes. This is actually an invalid
operation, and is supposed to be disallowed. There is already some code
that properly handle the situation. However, the field attribute was
not properly read in the case of fields of type date/datetime.
Related to Issue: #1911975
Co-authored-by: Mohammed Shekha <msh@openerp.com>
closesodoo/odoo#30029
The Pie Chart title is not translatable, since a string defined in a
`t-att-` cannot be translated.
We use the attribute `title` instead.
Tests are adapted in https://github.com/odoo/enterprise/pull/3379
opw-1908220
closesodoo/odoo#29991
When a percentage if formatted, the decimal separator used is always
`.`, while it should be the decimal separator of the language.
opw-1908220
closesodoo/odoo#30030
The 'Actions' menu displayed in the control panel (aka sidebar, or
toolbar), wasn't displayed anymore since the control panel
refactoring of 4cd379cf6e. Rev. c1752b834 correctly made it appear
again in list and form views. However, there was another issue as
the additional model-related items (like Print, or custom actions)
weren't fetched anymore. Thus, the sidebar only contained the
default 'Export' and 'Delete' actions. This rev. fixes the second
issue.
fixes#29546closesodoo/odoo#29633
Before this rev. a crash occurred when pressing backspace in the control panel
view searchbar input if there was no facet to remove.
The use case is now correctly handled and nothing happens.
Task 1902826
closesodoo/odoo#29602
Fine-tuning of commit e7fab23420
In a one2many with more than one page with a limit of k records, add a line l.
It increments the list limit to k+1. Remove a line above (of index <= k).
It will try to load a line l' to replace it, that it will find on page 2.
However when deciding if it should read missing fields on that record, it will
scan at most u records, skipping virtual ids.
Here u is the min between the current number of lines and the list limit
without the temporary increase due to the added record.
Since there are at least two pages, u = k.
However since l is in the list at index k, then l' won't be read, and since it
was on page 2 its data hasn't been loaded.
Therefore the js would traceback when trying to evaluate it.
opw 1913361
closesodoo/odoo#29338
Use case: a x2m (ex: attribute values) displayed in a x2m (ex: attributes on
product) using different fields in different views (ex: tags in product form view
and list in product attribute form view). When opening the x2m record (in a
wizard) then going back on the form view, the tags are empty because the
`display_name` value has been lost when fetching x2m for the second time.
In this case, the list `fieldsInfo` needs to be updated with the existing
(default for tags) one so all the fields will be correctly loaded.
Task 1916891
closesodoo/odoo#29598
Some aria attributes were missing on menus, and are required to ensure a
good compatibility with keyboard users and screen readers.
To solve the above, the following attributes are included:
- `aria-expanded`: this should be present in all dropdown menus. This is
set on elements with class `dropdown-toggle` and `o_closed_menu`.
- `role`: used to improve given information about what elements are for.
It is added in the following cases:
1. Non-button elements that have the class `dropdown-menu` are set to
`role="button"`.
2. Menu items that have the class `dropdown-item` are set to
`role="menuitem"`.
3. Menu separators that have the class `dropdown-divider` are set to
`role="separator"`.
This is a continuation of baa1c515c5closesodoo/odoo#29719
The week_start has been added as an option since commit 27b30daea5.
This stores as a database parameter the day starting the week, [1.. 7] starting
on Monday, while the calendar options expect to get Sunday as 7 % 7 = 0.
As a result the week number would be shifted.
Commit c72403d2ba solved the issue,
this commit adds tests for it.
opw 1916666
closesodoo/odoo#29838
After making improvement to allow user to choose first day of week per
language, it was not taken into account that calendar view uses
different weekdays indexing than newly added field `week_start`. The
difference is in Sunday, where in calendar view it has index 0, but
week_start index is 7 (other days' indexes match).
opw 1916666
closesodoo/odoo#29471
The `context` key wasn't correctly taken into account when computing the search
query for `filter``tags.
It is now correctly handled.
Task 1917628
closesodoo/odoo#29529
When filtering the calendar view on search filters, the filter `context`
was not taken into account during the reload.
For example, in the Calendar app, the filter 'My Meetings' has a `context`
{'mymeetings': 1} which was not passed to `search_read`.
Task 1917628
closesodoo/odoo#29531
Due to the recent refactoring in control panel 40dd12193,
some css rules have been broken in mobile.
To fix this, we need to set 'o_current' class inside the
displayed column because we need to know which one to
display in mobile.
This issue doesn't occur in desktop because all kanban columns
are displayed.
closesodoo/odoo#29457
Vincent Schippefilt