This commit rename product_uom_qty into reserved_uom_qty and product_qty
into reserved_qty on stock move line to stop mistake them with the stock
move quantities fields.
Task: 2648449
Part-of: odoo/odoo#80434
We fix 2 related UoM issues:
1. Fix quant inconsistency from changing the UoM of Done
stock.move.lines
Steps to reproduce:
- Enable "Storage Locations" setting
- Create a new "Storable Product" and create a receipt for 1 unit of it
- Validate the 1 unit receieved
- Open "Detailed Operations" of the move and change the stock.move.line
UoM to dozen.
Expected result: 13 on hand
Actual result: 1 on hand
To fix this:
- prevent users from editing the UoM after the picking is
done (i.e. unless adding a new stock.move.line and not saving).
- update the write on done logic so stock.move.line UoM changes are
considering and will update the quant correctly (in case of RPC or
direct write).
2. Prevent changing UoM of Done stock.move to prevent inconsistent field
values within stock.move and confusion for users
Steps to reproduce:
- Complete a picking (incoming is easiest to see) with a new product
(i.e. 0 qty) having 1 unit done.
- Unlock picking and add a new stock.move with 1 unit done and save.
- Edit the just added stock.move's UoM from Units to Dozen.
- Check the quantity on hand / Done qty of stock.move after leaving and
returning to form.
Expected result: 13 On Hand
Actual Result: 2 On Hand and the "Done" qty in the picking is 0.0083
(i.e. 1/12 of a dozen)
To fix this:
- prevent users from editing the UoM after the picking is done (unless
adding a new stock.move and not saving)
- if a Done stock.move UoM is uodated, a UserError occurs because there
is no straightforward way to ensure the quant is updated correctly
since is handled within the move.line (i.e. has no visibility to its
move's uom change => changing only UoM and not qty done will result in
no quant update)
closesodoo/odoo#76916
X-original-commit: 72a1e7d75f0b13f23def912c8bcc758c58438b04
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
Signed-off-by: Tiffany Chang <tic@odoo.com>
reserved_availability is expressed in move uom
forecast_availability must be in product base uom
closesodoo/odoo#75077
X-original-commit: fa9abcc1b105c07e1eaf6bdd3010abe19a056088
Signed-off-by: Rémy Voet <ryv-odoo@users.noreply.github.com>
Some changes in the delivery slip layout:
- For delivered products, replaces the Quantity column by two other
columns: Ordered and Delivered;
- Shows the non-delivered products even when the delivery is done and
haven't any backorder.
task-2373833
closesodoo/odoo#61366
Signed-off-by: Rémy Voet <ryv-odoo@users.noreply.github.com>
1. Add product category in inventory report.
2. Default quantity when creating a transfer switched to 1 instead of 0.
3. Remove the reorganize lines step in purchase tour (there is only 1
line).
closesodoo/odoo#69483
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
On a delivery, when changing the initial demand of a stock move, if its
value was 0 and becomes > 0, its state will be 'Partially Available' but
the reserved quantity will still be 0.
To reproduce the error:
1. Create 2 products P01, P02
- Product Type: Storable
- Qty On Hand: 1
2. Create + Confirm a SO with 1xP01 and 1xP02
3. Open SO's delivery
4. Unlock, set P01's initial demand to 0, Save, Lock
5. Unreserve, Check Availability
6. Unlock, set P01's initial demand to 1, Save
7. Click on PO1 line
Error: The stock move state is "Partially Available", but the initial
demand is 1 and the reserved quantity is 0. It should be "Waiting
Availability"
On step 5, since the wanted quantity of P01 is 0, the state of the stock
move becomes "Available". Then, when increasing the requested quantity,
the state automatically becomes "Partially Available" because the module
does not consider the case where the state is "Available" with a
reserved quantity equal to 0.
OPW-2488580
closesodoo/odoo#71445
X-original-commit: 05b6dfa0b1e4daf46d569c2e0a330b35e6437f8d
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
Signed-off-by: Adrien Widart <adwid@users.noreply.github.com>
We introduced new Smart Putaway Rules.
Locations now can have a storage category, on each storage category,
we can specify the amount of products/packages(with certian package
type) that can be stored in the location.
On putaway rules, we can also set a storage category. Now when apply a
putaway rule, we will find a suitable child location of the out
location according to quantity/weight setting on the storage category.
Task 2341820
PR #63516
ENT PR odoo/enterprise#15363
UPG PR odoo/upgrade#2040
Let's say we have location A, B, and C. A is the parent of B, B is the
parent of C. And we have a putaway rule to move product from A to B. Now
receive product at C, because currently when we can't find a putaway
rule at one location, we will loop to check its parent locations. So the
puteaway rule A -> B will be found, and product received at C will in
the end be stored at B.
After this commit, we don't check the parent locations when we can't
find a putaway rule.
Task 2341820
PR #63516
ENT PR odoo/enterprise#15363
UPG PR odoo/upgrade#2040
This method is useless and it bypass the computation of some fields
(qty_available, virtual_available, incoming_qty, outgoing_qty). Then
this method is not cache-friendly, and we should use `read` instead.
task-2439019
closesodoo/odoo#66621
Related: odoo/enterprise#16584
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
Add and improve onchange warnings when a duplicate SN is used in
following cases: inventory, picking (any type), manufacturing, scrap,
and "Update Quantity" (i.e. directly edit quants from product form).
Improvement includes:
- include location where the existing SN is
- auto-correct source location when appropriate (e.g. trying to scrap a
SN in the wrong location)
The goal of this is to prevent but not restrict duplicate SNs so users
can have some flexibility (especially if a dupe SN occurs because of an
error such as doing pick-pack-ship out of order.)
closesodoo/odoo#61287
Task: 1924758
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
Currently stock moves are auto-assigned (i.e. reserve free stock) both
when the scheduler is run and when a corresponding stock move that can
assign a move is completed. This strictness was causing issues for
prioritization of moves to assign, for example a picking with a
scheduled_date far in the future could automatically reserve all stock
if it was created before another picking that an immediate
scheduled_date. To ease this, an extra setting has been added to
stock.picking.type to let users choose how reservations should occur for
moves assigned to that picking_type (or picking with that picking_type):
1. 'at_confirm' = automatically when:
- stock is available when the move's associated picking/MO is
confirmed,
- when new stock becomes available,
- when the scheduler is triggered (+ stock available).
2. 'manual' = user must always manually click "Check Availability"
button (scheduler will no longer reserve).
3. 'by_date' = automatically when within the move's reservation_date
and:
- stock is available when the move's associated picking/MO is
confirmed,
- new stock becomes available when move is already confirmed, or
- the scheduler is run (+ stock is available).
'by_date' has an extra option of # days before the move's scheduled
date that affects the move.reservation_date.
Task: 2359317
Upgrade PR: odoo/upgrade#1868
ENT PR: odoo/enterprise#15050
This commit sets up the logic and adds the button for "Put in Pack"
action that already exists in stock.picking. Reuse/extension of logic
from stock.picking reused where possible, including extension of pack
wizard to handle products with different destination.
Note that logic to handle "Delivery Packaging" wizard when "Delivery
Methods" is active was purposely not extended to work correctly in batch
pickings due to complexity of adding in a new module just to handle
conflicting carrier_ids across pickings in the same batch. It is
expected that this use case will not occur except in case of user error.
Additionally, stock.picking implementation of 'put_in_pack' method has
been renamed to 'action_put_in_pack' to have consistent naming (and
support enterprise level code).
Part of "1. Improve Batch Pickings" specification of overall barcode
improvements task.
Task: 1884520
Enterprise PR: odoo/enterprise#12086Closes: odoo/odoo#55096
1) Create a stockable product > Add some quantities on hand
2) Edit this product > set it as a consumable or service
3) Create an inventory adjustment on all products
Error will raise "Something went wrong! You can only adjust storable products.
This occur because when switching product type the available quantity
was not cleared, so it will get in the next inventory, but only storable
products can have inventory. So the product should to have no
quantity left before switching type
opw-2300478
closesodoo/odoo#55062
X-original-commit: be17e31307070498ba9ac7dc594443730caa7404
Signed-off-by: Nicolas Lempereur (nle) <nle@odoo.com>
Signed-off-by: agr-odoo <agr-odoo@users.noreply.github.com>
Let's say we have a chain of move
wh1 - intercomp transit -> intercomp transit - wh2
The second move will be reserved according to what the first move
brought since they are chained. This behavior resulted in rev[0] which
tries to work around the ir.rule limiting the access of stock.move and
stock.move.line records in multi-company environment.
This patch wasn't perfect since, if the first move brought a lot, the
second move will reserve this lot and it will result in another access
error since the lot will still have the company of the first move.
We fix this by implementing the following logic: receiving from another
company should behave the same as receiving from the supplier, no
reservation is applied. We fix this by marking the inter company transit
as `_should_bypass_reservation` and we break the move chain if the
pull/push rule create an intercompany chain.
[0] 6ff34073153767d449804669f31e26c04de0a670
closesodoo/odoo#45601
Task: 2160847
X-original-commit: 67b45da9d877a5a1bb9adb3ce14051e01f67045f
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
Create an immediate transfer for a receipt, add a move, set a quantity
done and due to rev[0], an initial demand is set, then
_autoconfirm_picking is called and action_confirm of picking calls
_action_assign if the location source bypasses the reservation. Set
again an inferior qty_done, the initial demand is also updated due to
rev[0] and somehow the system tries to write on a now unlinked move
line.
fixes
- never reserve an immediate transfer
- never update the initial demand if the move is reserved to fix the
existing databases.
- adapt _compute_state so that immediate transfer moves considered
reserved so that they're always "ready"
- adapt the test that was working on an immediate transfer picking and
setting the initial demand while it's not possible through the
interface, the user can only set the done quantity.
[0] 8303b1aclosesodoo/odoo#45317
X-original-commit: 357e0a862744f1bc23a9643a1822d2ee4a2eb7a2
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
Before this patch, validating an unreserved move of a dozen while 12
units were reserved resulted in a quant with 0 unit as quantity and 11
units as reserved quantity.
closesodoo/odoo#45132
X-original-commit: bf7d76a7127521ba17f29bc470c3d551cc9988d5
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
When a user unreserve a picking or a move it will
drop all the linked move lines. However it could
happens that some move line already have a done quantity
and the user won't lose this information.
This commit filters move lines in order to only drop
the move line without quantity done and remove the
reserved quantity on others.
Joint work with William Henrotin <whe@odoo.com>
task-2069646
Before this commit, a move can be 'assigned' even if it has no reserved
quantity.
How to reproduce:
- For a tracked product, add some quantities for a LN/SN. Create an
another LN/SN with no quantity;
- Create a delivery for this product;
- Confirm it and check availability;
- On the move line, change the SN/LN for the one without quantity.
--> The move has no reserved quantity but is still marked as
`assigned`.
task-2171546
closesodoo/odoo#44145
X-original-commit: d5e70fa9778240b23515cea6ab1a3d0a674ac940
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
Co-authored-by: sle-odoo <sle@odoo.com>
Two of the UserErrors mentioned 'quantites' instead of 'quantities' before this commit. This commit fixes the terms and the translation file.
closesodoo/odoo#43902
X-original-commit: 68a849bfb507c5fa14b869a44ea50bf88ff3ce1f
Signed-off-by: Martin Trigaux (mat) <mat@odoo.com>
Improve the inherited wizards of 'stock.warn.insufficient.qty' by adding
some piece of information about the quantity involved. Also
change titles to integrated the related product into.
task-2144636
Co-authored-by: Ankita Raval <anr@odoo.com>
followup of rev [0]
If these wizards are called on multiple pickings, display the list of
the pickings that could be impacted and allow to select which one should
be impacted.
We also adapt the sanity checks at the start of `button_validte` in
order to specify the concerned pickings if needed. We do not enable the
multi behavior for batch at the moment, so it's only enabled for the
validate multi in the list view.
[0] 6ab4b0d496
task-2069646
closesodoo/odoo#41497
X-original-commit: ff276c6484b138982f185ec9c832f2dbf25baaef
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
This context key was used to get the valued quantities. We now have a
`quantity_svl` computed field that does this job. The test is removed,
it was showing that intercompany quants are visible thanks to a context
key but with the introduction of the on_hand filter, it is now useless
(just remove the filter)
`action_done`on pickings should be a private method,
and called only trough the picking validation process.
task-1938108
closesodoo/odoo#39174
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
As this wizard only shows the first product overprocessed and does nothing else,
we remove it completely for cleaning purposes.
task-1938108
closesodoo/odoo#39161
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
All transit locations were set as active by default, confusing some users.
There are now set as active only when when a ressuply route is created
between some warehouses
TaskID: 1873106
Ensure proper domains are applied and enforced on relation fields thanks
to the `check_company` attributes.
product.template
- make responsible a property field in order to ensure proper next activities when a product
is used between multiple companies
stock.putaway.rule
- added a company_id field
stock.move.line
- company_id is not related anymore since a move line can exist without a move until its validation
stock.package_level
- added a company_id field
stock.picking.type
- company_id is now required
stock.production.lot
- added a company_id field, adapted the constraint accordingly
stock.quant
- check the consistency only in inventory mode
stock.quant.package
- company_id is now empty if the package is empty
stock.picking
- company_id is now related to the one of its picking type
Added some tests.
Moved stock_traceability in the `report` directory.
Removed useless /tests/tours/route.js.
task-1985992
-Purpose of this task is speed up the put in pack process.
-after this commit, on the Picking when clicking 'Put In Pack' button
if there are no quantity set as done all the reserved quantity put in
the pack.
Task- 1966999
closesodoo/odoo#35280
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
test_putaway_6 creates 2 putaway rules on the same product category but to different location.
As the order on putaway rule is [sequence, product_id] and the two have the same sequence,
it can happens that the choosen rule is not always the same,
Furthermore, the test tried to show the hierarchy between two category matters in term
of putaway rule.
This commit create a child category of 'all' and set it on one of the rule.
closesodoo/odoo#35264
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
pass all test cases without any demo data.
If a user has not installed any demo data, then also test cases must not be break.
task-2024202
closes : https://github.com/odoo/odoo/pull/34258
The goal is to be coherent with the user property.
Actually, company_id and company_ids on the environment are no fields.
Calling env.company_id returns a browse record, not an id.
Purpose
=======
Allow the user to select the allowed companies for which he wants to see records
on top of selecting his current company.
It is confusing for users to see the records from the company he is connected to
and the records of the children companies.
Instead of using the hierarchy of companies to access records across companies,
the user can now select (from his set of allowed companies) the companies for
which he wants to access records.
/!\ This means that the user will interact with records from company A when in
company B.
Example: a SO has been created and confirmed in A. When in B, I create the
invoice from it.
Specifications
==============
1/ Deprecate the parent/children hierarchy on the res.company model. The fields are
kept on the res.company model to ensure the retro-compatibility, but won't be used
accross the standard code anymore. The only functional usage for this mechanism
was to allow to see records from several companies by creating a virtual parent
company, which will be possible with the new mechanism.
2/ By default, a user will only see the records of the company he is connected
to (or records without a company). (It is still editable by the user if needed).
For that, put this information in the user context, to allow having different
configurations on different browser tabs. Instead of having domains like
['|',
('company_id', '=', False),
('company_id', 'child_of', user.company_id.id)]
you'll have something like
['|',
('company_id', '=', False),
('company_id', 'in', company_ids)]
Note that the 'company_ids' is a value that is passed in the evaluation
context on the record rule, as we already have user, or time.
company_ids is a list of the ids of all the enabled companies in the
user's context.
3/ Out of the generic improvements brought by this task, this will illustrate
issues that could exist since several versions. For example, it should not be
possible to create a scrap order for the company A with a package of the company
B, or it should not be possible to create an invoice on the company A with
payment terms from the company B. Before the version 12.0, it was easy to
encounter this kind of issues as the admin was the SUPERUSER_ID. A positive side
effect of the fact that the SUPERUSER_ID has become an inactive user was to
make it more difficult to introduce mismatch on the records, but haven't solved
the issue, as it was still possible to do it with parent companies
configuration. Some of these issues have been fixed in this commit, but all the
business flows should be re-tested to check if an ir.rule should be introduced
(eg: a multi company rule for stock.quand.package), if the company of a record
is correctly transfered to another record created from the first record (eg:
From a SO, create an invoice and a payment, the company of the sales order
should be transfered on the invoice and the payment, even if the company of the
sales order is A and I'm logged into the company B with the company A enabled.
4/ Currently, if I click on a button on a notification email (example 'View
Task'), I face a traceback if I'm not logged into the company of the record.
Now, if you click on a button and if you have access to the record, the correct
company will be automatically set.
5/ If I display a kanban view with several records from several companies (and
an image), all the images should be displayed.
6/ Currently if you copy paste an url, this will crash if you're not in the
correct company. This won't be fixed because it's quite impossible to do it in
a clean way. This task brings a workaround. Copy/Paste -> Traceback -> Log into
the correct company, re-copy/paste -> Ok.
7/ 2 property methods have been added on the environment to retrieve the company
on which the user is logged in and the companies the user enabled, on a specific
tab.
That way, when creating a record, instead of doing
default=lambda self: self.env.user.company_id
do
default=lambda self: self.env.company_id
On the other hand, to retrieve the enabled companies, do
companies = self.env.company_ids
8/ Modify the Company Switcher widget to allow to log into another company
WITHOUT writing on the res.users (and thus bringing cache invalidation issues
and so on). Also allow to enable several companies and see records from several
companies, and independantly of the other browser's tabs.
9/ When focusing on a tab, save the current company configuration on the local
storage. That way, when doing 'CTRL+T' or a middle click, the context is
propagated to the new tab.
10/ Improve the error message in case of multi company access errors. Now, when
the user is in debug mode, display the related names of the records and the name
of the user who brings the issue.
11/ Remove the context erasing when writing on a res.users
This is probably coming from the migration to new API of the base module.
The context was not propagated at this moment, which was a common mistake at
that time. When migrating the module, probably by using the 'black box' method,
as the context was not propagated, it was erased on the new version. This is
now an issue because the context (i.e. the enabled companies) was erased when
writing on a res.users, leading to tracebacks.
See: https://github.com/odoo/odoo/commit/7eab8e26d3d46c53f4be924d6a34e80a66e74960#diff-4c2e738ee8f64f11806c889ea097b5e7R624
12/ Fix the crash manager on redirect warnings. The issue is the following
- Create an invoice on a company without a configured CoA.
- Set a partner
- On the onchange_partner_id, a redirect warning is raised to propose you
to configure a CoA
- Click on 'Go to the configuration panel'
- A generic warning says something like 'Do you want to discard your changes?'
- Click on yes, the page refreshes, but not on the redirect action.
Now, set correctly the action on the hash, and reload instead. The breadcrumb is
lost for example, but you reach the correct action at least.
13/ Introduce a res.group to enable/disable the multi company per tab
feature.
14/ To help the users to know which tab is in which company, add the
possibility to have a favicon per company. When creating a company,
the classical 'O' icon is colored by default in a random color.
15/ Remove the company switcher on the frontend. This was mainly there
to allow a user to swicth to the company linked to the website.
This behavior is now transparent to the user. If the website A is
activated, then the company set on the context is the company of the
website.
16/ Deprecated the _company_default_get method on the res.company
model. Remove the method _get_company on the res.users model.
17/ Add 'allowed_company_ids' and 'current_company_id' on the pyeval
context. You can now use those variables on domains in the views to
access directly to the activated company.ies on the current tab.
TaskID: 1960971
closesodoo/odoo#32341
Signed-off-by: Yannick Tivisse (yti) <yti@odoo.com>
before on runbot:
odoo.addons.stock.tests.test_move tested in 31.79s, 63166 queries
odoo.addons.stock.tests.test_move2 tested in 33.69s, 68046 queries
odoo.addons.stock.tests.test_quant tested in 8.48s, 15351 queries
odoo.addons.stock.tests.test_stock_flow tested in 16.99s, 31506 queries
amounting to 90 seconds on a build page
after om runbot:
odoo.addons.stock.tests.test_move tested in 12.41s, 24197 queries
odoo.addons.stock.tests.test_move2 tested in 13.55s, 24254 queries
odoo.addons.stock.tests.test_stock_flow tested in 9.74s, 15795 queries
amounting to 37 seconds on a build page
Use savepoint case instead of transaction case.
We took the opportunity to rename the master data more appropriately,
which results now in a bigger diff in TestMove and TestQuant. In
TestQuant, the master data creation had to be moved in the setUpClass
too.
We removed test_shipment as test_backorder_1-4 in tet_move_2 covers the
same parts of the code.
PutAwayStrategy model was deleted and FixedPutAwayStrategy model was
renamed into PutAwayRule.
Now, each location can contain multiple putaway rules, each rule
applying either on product or on product category.
The purpose is to:
- Add more visibility on putaway settings (with a stat
button on product, product category and location views, and a
submenu item in Product configuration menu).
- Change putaway model to avoid redundancy.
Task #1935169closesodoo/odoo#30889
Usecase to reproduce:
- Set 1 unit of product A in stock
- Scrap 1 dozen of product A
Warning message for Insufficient Quantity is not triggered.
It happens because there is no UoM conversion between scrap qty and
product quant quantity.
Fixes#30570closesodoo/odoo#30589
William Henrotin