And other reported English mistakes in source string
Courtesy of Transifex translators
And remove leftover from gengo
closesodoo/odoo#59022
X-original-commit: 26efc84c5cac47a2cc83d7b084f8b71528fec6c7
Related: odoo/enterprise#13781
Signed-off-by: Martin Trigaux (mat) <mat@odoo.com>
This commit sets up the logic and adds the button for "Put in Pack"
action that already exists in stock.picking. Reuse/extension of logic
from stock.picking reused where possible, including extension of pack
wizard to handle products with different destination.
Note that logic to handle "Delivery Packaging" wizard when "Delivery
Methods" is active was purposely not extended to work correctly in batch
pickings due to complexity of adding in a new module just to handle
conflicting carrier_ids across pickings in the same batch. It is
expected that this use case will not occur except in case of user error.
Additionally, stock.picking implementation of 'put_in_pack' method has
been renamed to 'action_put_in_pack' to have consistent naming (and
support enterprise level code).
Part of "1. Improve Batch Pickings" specification of overall barcode
improvements task.
Task: 1884520
Enterprise PR: odoo/enterprise#12086Closes: odoo/odoo#55096
- The deadline of MO generated via procurements is calculated differently.
Now, it doesn't take anymore in account the manufacturing_lead
of the company (Security Lead Time of MO). The computation of planned date remains unchanged.
- The date_expected fields was duplicated with the date fields
except when the move was done. Merge both fields.
The only information lost is: we can't know what was the
scheduled date before processing move (`state` == done).
Indeed, the date becomes the actual move processing datetime.
- The `date` in `stock.picking` field contained the time of
(purchase) order `date_order` (`purchase.order`).
This field is was wrongly used in the kanban view where we
expected to see date_planned instead. Also, the `_order` used
this date instead of date_planned too.
- The `delay_alert` is activate independently of stock rules.
Then it is now activate in all case.
- Remove the auto-reschedulting process of stock move via
the stock rule (`propagate_date` and `propagate_date_minimum_delta`).
Replace it by a automatic deadline date (`date_deadline`) propagation.
The deadline is the promise done to/by vendor/client (SO/PO)
then it is a readonly fields on picking/move and MO.
- Now the Scheduled date (`date`) of stock move is never propagate
and it is only related to the Scheduled date of
related document (MO or picking).
- Now when a move is created from procurement (sale),
`date_planned` = `date_deadline` - `security_lead`.
- The `delivery_date` of sale is no editable after confirmation
and propagate as the deadline to related stock move linked to order_line
- Adapt filter and decoration of MO and picking.
- Because we are the client in case of purchase (PO), the promise of vendor
can be not respected. Then we add the lead security to the deadline
(inverse the sale order logic) of PO picking (promise reciept date
+ security lead) to match with the replenishment.
task-2246665
In stock:
1. remove string of action_show_details button, only show icon
2. late filer have been megered with planning issues filer,
update the name. (also in mrp)
3. add width to json_lead_days_popover field to show it properly
4. change inventory adjustment empty screen image.
In purchase:
1. in reminder mail, show "undefined" when no date. This will
only be shown in preview. When no date, we won't send reminder mail to
the vendor.
2. remove old book icon for document in setting.
3. check if there is date_planned when craete a confirm date url
4. RFQs late filter now show all late RFQs with in state "draft",
"sent", and "to approve".
5. improve the the words in KIP and empty screen and list view
Task 2298950
PR #55155closesodoo/odoo#55740
Related: odoo/enterprise#12344
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
Before this commit, passing the `default_warehouse_id` in the context
has no effect with the product replenish wizard because the warehouse id
was overrided in the `default_get`.
The code was wrongly always taking the reserved quantity on the already
returned moves, but if they're done their value is zero.
task-2291973
closesodoo/odoo#54807
X-original-commit: 7b08f0ae0a39e8f575b21e744de16264b6365704
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
1. Activate receipt in 2 steps
2. Make a PO of 10
3. Receive 8 (pick 1), backorder
4. Receive 2 (pick 2)
5. Unreserve the internal transfer (pick 3)
6. Go to pick 2, return 2 (pick 4)
=> product is sent back to the supplier
7. Go to pick 4, return 2 (pick 5)
=> product is received from the supplier
8. Go to pick 3, check availability
Only 8 units are reserved instead of 10.
It happens because pick 5 (return of the return) is not linked to the
pick 3 (internal transfer).
We use a similar approach for `move_dest_to_link` than the one used for
`move_orig_to_link`.
Closes#52459
opw-2271838
closesodoo/odoo#53506
X-original-commit: c96339dd94ffe1e9c5103814062455c79d93a273
Signed-off-by: Nicolas Martinelli (nim) <nim@odoo.com>
Support two new syntaxes with `_()` method:
_("This is so %s") % 2019
_("Text with %s placeholders", 42)
_("Text with %(num)s placeholders %(symbol)s", num=42, symbol="🧀")
The main benefit is to have a fallback on the source string if formating the
translated string fails (e.g. "Foo %s" translated "Foo s%").
This PR converted most (but not all) calls to _ using placeholders to use the
new syntax. Hopefully, the remaining ones will be converted in the future and
avoid technical debt.
Use named placeholders when needed. If more than one placeholder is present in a
string, using named placeholder can be beneficial to reorder the placehodler
position (for languages like Japanese that do not use the same phrase
construction). On some sentences, it also brings clarity on the meaning of the
placeholders.
closesodoo/odoo#52155
Task-id: 1853119
Signed-off-by: Martin Trigaux (mat) <mat@odoo.com>
Using a few regex like
\((_\(.*%s.*)(\) % )([\w\[\]][\w .\[\]\(\)'"]*)\)
($1, $3))
Old syntax is still compatible but starts the migration to the new
syntax that catches error.
Previously the option to choose preferred routes in the replenish wizard
was only possible when stock setting: group_stock_adv_location (Multi-Step
Routes) was activated.
Part of specification 4 of overall inventory onboarding improvement task.
Task: 2220129
Related Enterprise PR: odoo/enterprise#10719closesodoo/odoo#51676
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
1. Activate receipt in 3 steps
2. Make a PO of 50
3. Receive 20 (pick 1), backorder
4. Receive 29 (pick 2), backorder
5. Receive 1 (pick 3)
6. Transfer to quality check location 45 (pick 4), backorder (pick 5)
7. Go to pick 5, unreserve the quantity
8. Go to pick 3, return 1 => the quantity suggested by the return wizard is 1
The return is not able to reserve the necessary quantity.
This happens because 45 units are considerd out (from pick 4), but only
1 unit is considered in (pick 3). Therefore, in the following:
https://github.com/odoo/odoo/blob/23511dffb9e3f597a7df9bb834d008f74abb07b8/addons/stock/models/stock_move.py#L1276
we have `quantity = -44.0` and `available_quantity = 5.0`, so we can't
reserve.
We count as `move_orig_ids` all the siblings coming from
`move_dest_ids`.
opw-2261473
closesodoo/odoo#52084
X-original-commit: ba89e26750baab2309cccc4ffd0b3ade804d19ce
Signed-off-by: Nicolas Martinelli (nim) <nim@odoo.com>
New report to easily order missing products in each warehouse.
Orderpoint have a new type: 'manual'. Manual orderpoint are not
trigger by the scheduler but the user could create replenishment
from the report directly. The report use the forecast report in
order to detect missing quantity for today (it does not search
depending the lead time for each product warehouse due to lake
of performance). It compares missing quantity with incoming RFQ
and other ongoing orderpoint. If it still missing a new entry
for replenihsment is created (it's also automaticaly deleted if
the replenihsment has been done another way).
Task: 2161378
- Activate Developer mode
- Go to Settings / Technical / Actions / User-defined Defaults
- Create the following:
Field: To Refund (update SO/PO) (stock.return.picking.line)
Default Value (JSON format): true
- Create a SO with a product invoiced based on delivered quantity
- Validate the SO, validate the picking
- Return the picking
The field 'To Refund (update SO/PO)' is is not, while it should be.
This is because we don't explicitly call the `default_get`, therefore
only rely on the default value of the field.
opw-2172513
closesodoo/odoo#45235
X-original-commit: 70d6f25b83f962d91243edaa0ff8e9a78b2e18ac
Signed-off-by: Nicolas Martinelli (nim) <nim@odoo.com>
Improve the inherited wizards of 'stock.warn.insufficient.qty' by adding
some piece of information about the quantity involved. Also
change titles to integrated the related product into.
task-2144636
Co-authored-by: Ankita Raval <anr@odoo.com>
followup of rev [0]
If these wizards are called on multiple pickings, display the list of
the pickings that could be impacted and allow to select which one should
be impacted.
We also adapt the sanity checks at the start of `button_validte` in
order to specify the concerned pickings if needed. We do not enable the
multi behavior for batch at the moment, so it's only enabled for the
validate multi in the list view.
[0] 6ab4b0d496
task-2069646
closesodoo/odoo#41497
X-original-commit: ff276c6484b138982f185ec9c832f2dbf25baaef
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
Steps to reproduce the bug:
- Let's consider two storable products P1 and P2 from the same vendor V
- P1 and P2 have the routes 'Buy' and 'Make to order'
- Create a SO for 1 P1 and 1 P2 and confirm it
- A delivery order DO has been created
- A PO has been created for V, confirm it
- Process the shipment, receive 1 P1 and 0 P2 with no backorder
- Process DO with no backorder
- Return DO by clicking on 'Return' button
Bug:
1 P1 and 1 P2 were suggested to be returned but the movement for P2 had been canceled.
Closes#39547
opw:2116582
closesodoo/odoo#40220
X-original-commit: bb94b6591fb148a4c1b94f9c28d2c10e44e12283
Signed-off-by: Simon Goffin (sig) <sig@openerp.com>
Wrong key in default_get. It should be `company_id` instead of `company`
closesodoo/odoo#39448
X-original-commit: 0859a5b073aeadf7cfa5e32b7c45cce7a1933f0d
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
So we have to adapt
- the sanity checks
- the immediate/backorder wizards
- split the call to _action_done with and without backorder
This is a preliminary work to remove all the override in
stock_picking_batch and to allow choosing the pickings to immediate or
backorder directly in the wizards.
Before this commit, both wizards were calling _action_done and one
another. We make them go back through `button_validate` so that it is
more sane to handle and allow future extensions to add pre-action done
wizards.
Also the first part of button_validate is some sanity check. We adapt
them to be multi (inside of a loop over self) without any other
changes.
Now the wizard can work on the records (immediate: write the done
quantities) or work with the context (backorder: picking ids to not
backorder in the context).
Also we adapt the stock sms weird wizard (a confirmation wizard but the
feature is auto installed? wth). Now there it isn't manually called in
the middle of button_validate but it uses the pre_action_done_hook.
task-2069646
`action_done`on pickings should be a private method,
and called only trough the picking validation process.
task-1938108
closesodoo/odoo#39174
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
As this wizard only shows the first product overprocessed and does nothing else,
we remove it completely for cleaning purposes.
task-1938108
closesodoo/odoo#39161
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
As the responsible can be assigned directly in the list view, the assign
responsible wizard is now useless. The Country will not forget what you
did for us wizard, thank you.
closesodoo/odoo#38365
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
The replenish action shouldn't be accessible through the action dropdown
(it makes no sense to replenish consumables or services).
It is already accessible on the product/template form when applicable.
Closes https://github.com/odoo/odoo/issues/38238closesodoo/odoo#38332
X-original-commit: 52d7008da888f1a84e38c6b110450062ac3bceaa
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
Removes the action assign responsible on picking since it can be assign
directly on the list view now.
The wizard must be deleted in the next version.
Task #2078163
When .with_context() is called with a dictionary as 1st positional
argument, it will replace context (and not modify the referenced keys)
It may create bugs when losing the content of the context (e.g. remove
partner's language)
This is a cherry-pick to saas-12.5 of odoo/odoo#36164 of the logistic
part as discussed
closesodoo/odoo#36690
Signed-off-by: Martin Trigaux (mat) <mat@odoo.com>
Ensure proper domains are applied and enforced on relation fields thanks
to the `check_company` attributes.
product.template
- make responsible a property field in order to ensure proper next activities when a product
is used between multiple companies
stock.putaway.rule
- added a company_id field
stock.move.line
- company_id is not related anymore since a move line can exist without a move until its validation
stock.package_level
- added a company_id field
stock.picking.type
- company_id is now required
stock.production.lot
- added a company_id field, adapted the constraint accordingly
stock.quant
- check the consistency only in inventory mode
stock.quant.package
- company_id is now empty if the package is empty
stock.picking
- company_id is now related to the one of its picking type
Added some tests.
Moved stock_traceability in the `report` directory.
Removed useless /tests/tours/route.js.
task-1985992
In detailed operation view, the method to generate and assign multiple
SN numbers will create a move line depending of the SN name the user
defined and the number of SN to generate. These features are only
accessible if picking option "Pre-fill Detailed Operations" is disabled.
Also, hides the quick "Assign Serial Numbers" button in the same case.
Task #2028780
from f5e99060b6, a scrap order was unlink
when clicking the discard button in the insufficient quantity wizard.
This lead to a access error when the wizard was closed on the scrap order
form view. The form view was reloaded on a deleted record.
This commit adds a context key that prevent the unlink if the scrap order
was validated from the scrap form view
Task : 2043136
This attribute is misleading as it is insufficient to correctly upgrade
the database. It only renames the column in the database, but other
operations are needed, like updating the corresponding `ir.model.fields`
record (and its xmlid). The default values and the translations are also
lost during the upgrade.
Moreover, this feature was misused. It was:
- left on fields during multiple versions.
- used on reports (SQL views). This would be ok if the feature was
complete, but, as is, it was useless.
- kept unchanged after a second renaming of the field (which can happen
versions later the first rename).
- used, even when the meaning of the field changed. i.e. the field
`archived` has been renamed to the classic `active`, but the value
in the database should be switched.
* account, crm, hr, im_livechat, l10n_ch, l10n_it_edi, mail,
mass_mailing, project, stock, base
- `String` -> `string`;
- `defaut` -> `default`;
- `defaults` -> `default`;
- `reandonly` -> `readonly`;
- removed redundant `placeholder` attribute for `Char` field;
- removed redundant `size` attribute for `Float` and `Integer` fields;
- changed to use `Selection` instead of `Char` for a field having a
defined `selection`.
closesodoo/odoo#35356
Signed-off-by: Martin Trigaux (mat) <mat@odoo.com>
On stock list view of a single product, when user click on "Inventory at
Date" button, the displayed report shows all products.
This commit makes the report only shows the current product.
Task #2039731
Multi is the default api for methods, it is not necessary to explicitly
decorate methods with it, adds clutter and most people use it because
they see that the rest of the code uses it.
Done with `find . -type f -name '*.py' | xargs sed -i '/@api.multi/d'`
Usability improvement because when the user click on inventory
report it's mainly in order to edit/check its current stock since
commit da33eb36b8
This change redirect the user directly on stock.quant tree view
and add an inventory at date button in the control panel. This
button will open the same wizard than previously and ask for a
date. The same principle is used for valuation layer.
Co-authored-by: svs-odoo <svs@odoo.com>
Task: 1880379
Since previous commit moved decimal_precision module's feature into base,
use the new syntax for fields declaration
Remove the imports to the removed module
Remove the module from dependency in manifest
sed -i "s|digits=dp.get_precision('\([A-Z a-z]*\)')|digits='\1'|" **.py
sed -i "/from odoo.tools import decimal_precision as dp/d" **py
Product "Update Quantity" button can open the "Change Product Quantity"
wizard if all advanced stock options (stock locations, assign owner,
tracking by SN/LN, packaging) are disabled.
Task #2006337closesodoo/odoo#33873
Signed-off-by: Simon Lejeune (sle) <sle@openerp.com>
Adds a button in stock move form view to generate multiple serial number
and assigns them to stock move lines.
Through a wizard, the user enter the first SN. Then, starting with this
number, iterates to assign and increment the SN on each move line who
doesn't have already one.
Task #1832645closesodoo/odoo#33466
Signed-off-by: Arnold Moyaux <amoyaux@users.noreply.github.com>
The old tree views don't really exist anymore, this odd pseudo-flag to
dispatch between "list" and "tree" tree views has no reason to remain.
Task 1937686
closesodoo/odoo#31243
Signed-off-by: Xavier Morel (xmo) <xmo@odoo.com>
Martin Trigaux